SEEING THE TABLES
Friday, November 14, 2008
now see this
CODE
r1#config t
Enter configuration commands, one per line. End with CNTL/Z.
r1(config)#router rip
r1(config-router)#do siib
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 unassigned YES NVRAM administratively down down
FastEthernet0/1 unassigned YES NVRAM administratively down down
Ethernet1/0 unassigned YES NVRAM administratively down down
Ethernet1/1 unassigned YES NVRAM administratively down down
Ethernet1/2 unassigned YES NVRAM administratively down down
Ethernet1/3 unassigned YES NVRAM administratively down down
Serial2/0 172.16.12.1 YES NVRAM up up
Serial2/1 unassigned YES NVRAM administratively down down
Serial2/2 unassigned YES NVRAM administratively down down
Serial2/3 unassigned YES NVRAM administratively down down
Loopback0 172.16.1.1 YES NVRAM up up
Loopback48 192.168.48.1 YES NVRAM up up
Loopback49 192.168.49.1 YES NVRAM up up
Loopback50 192.168.50.1 YES NVRAM up up
Loopback51 192.168.51.1 YES NVRAM up up
Loopback70 192.168.70.1 YES NVRAM up up
r1(config-router)#passive-interface l0
r1(config-router)#passive-interface l48
r1(config-router)#passive-interface l49
r1(config-router)#passive-interface l50
r1(config-router)#passive-interface l51
r1(config-router)#passive-interface l70
r1(config-router)#end
r1#
*Mar 1 00:47:28.363: %SYS-5-CONFIG_I: Configured from console by console
r1#debug ip rip events
RIP event debugging is on
r1#
*Mar 1 00:47:43.311: RIP: sending v2 update to 224.0.0.9 via Serial2/0 (172.16.12.1) its now using only serial 2/0 for the updates and it reduces cpu cyc
*Mar 1 00:47:43.319: RIP: Update contains 7 routes
*Mar 1 00:47:43.319: RIP: Update queued
*Mar 1 00:47:43.323: RIP: Update sent via Serial2/0
r1#
*Mar 1 00:47:59.655: RIP: received v2 update from 172.16.12.2 on Serial2/0
*Mar 1 00:47:59.659: RIP: Update contains 2 routes
r1#
Enter configuration commands, one per line. End with CNTL/Z.
r1(config)#router rip
r1(config-router)#do siib
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 unassigned YES NVRAM administratively down down
FastEthernet0/1 unassigned YES NVRAM administratively down down
Ethernet1/0 unassigned YES NVRAM administratively down down
Ethernet1/1 unassigned YES NVRAM administratively down down
Ethernet1/2 unassigned YES NVRAM administratively down down
Ethernet1/3 unassigned YES NVRAM administratively down down
Serial2/0 172.16.12.1 YES NVRAM up up
Serial2/1 unassigned YES NVRAM administratively down down
Serial2/2 unassigned YES NVRAM administratively down down
Serial2/3 unassigned YES NVRAM administratively down down
Loopback0 172.16.1.1 YES NVRAM up up
Loopback48 192.168.48.1 YES NVRAM up up
Loopback49 192.168.49.1 YES NVRAM up up
Loopback50 192.168.50.1 YES NVRAM up up
Loopback51 192.168.51.1 YES NVRAM up up
Loopback70 192.168.70.1 YES NVRAM up up
r1(config-router)#passive-interface l0
r1(config-router)#passive-interface l48
r1(config-router)#passive-interface l49
r1(config-router)#passive-interface l50
r1(config-router)#passive-interface l51
r1(config-router)#passive-interface l70
r1(config-router)#end
r1#
*Mar 1 00:47:28.363: %SYS-5-CONFIG_I: Configured from console by console
r1#debug ip rip events
RIP event debugging is on
r1#
*Mar 1 00:47:43.311: RIP: sending v2 update to 224.0.0.9 via Serial2/0 (172.16.12.1) its now using only serial 2/0 for the updates and it reduces cpu cyc
*Mar 1 00:47:43.319: RIP: Update contains 7 routes
*Mar 1 00:47:43.319: RIP: Update queued
*Mar 1 00:47:43.323: RIP: Update sent via Serial2/0
r1#
*Mar 1 00:47:59.655: RIP: received v2 update from 172.16.12.2 on Serial2/0
*Mar 1 00:47:59.659: RIP: Update contains 2 routes
r1#