LAB 2-2 EIGRP CISCO LAB GUIDE
Friday, September 19, 2008
LAB 2.2 EIGRP LOAD BALANCING:
LEARNING OBJECTIVES:
1.Review basic eigrp configuration
2.explore the eigrp topology table
3.learn to identify successor, feasible successors and feasible distances
4.learn to use debug commands for eigrp topology table
5.configure and verigy equal cost load balancing with eigrp
6.configure and verify unequal cost load balancing with eigrp
SCENARIO:
As a senior network engineer you are considering deploying eigrp in your corporation. you are also interested in equal cost and unequal
cost load balancing because your network is filled with redundant links these links are not often used by other link state protocols
because of high metrics . since you are interested in testing eigrp claims that you have read about.you decide to implement and test on
a set of three lab routers before deploying eigrp throughout your corporate network ...
the following is the topology
the following are the lab router configs