INTO TOPOLOGY  

Friday, November 14, 2008

there are two things two keep in mind here while configuring

first of all , the primary requirement of this lab was to advertise all of the networks with the help of rip routig protocol , except 199.9.9.0 network

this is done on purpose to test the route reflector purpose

CODE
sanjose2#show ip proto
Routing Protocol is "rip"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Sending updates every 30 seconds, next due in 21 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triggered RIP Key-chain
Serial2/0 2 2
Serial2/1 2 2
Loopback0 2 2
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
172.24.0.0
192.168.1.0
200.100.50.0
Routing Information Sources:
Gateway Distance Last Update
Distance: (default is 120)

Routing Protocol is "bgp 100"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Route Reflector for address family IPv4 Unicast, 2 clients
Route Reflector for address family VPNv4 Unicast, 2 clients
Route Reflector for address family IPv4 Multicast, 2 clients
IGP synchronization is disabled
Automatic route summarization is disabled
Neighbor(s):
Address FiltIn FiltOut DistIn DistOut Weight RouteMap
172.24.1.18
192.168.1.5
Maximum path: 1
Routing Information Sources:
Gateway Distance Last Update
172.24.1.18 200 00:17:00
Distance: external 20 internal 200 local 200

sanjose2#


now advertise 199.9.9.0 network into bgp on sanjose3 and see the results

Design by Blogger Buster | Distributed by Blogging Tips